If you are a professional who needs the last word in reliable reference monitoring in a compact form, then the PMC6 active two-way is the answer.

The PMC6 is packed with innovation and providing the same sonic signature as our renowned larger monitors, it’s ideal for smaller control rooms or for use in larger immersive systems, where its astounding resolution allows critical mix decisions to be made with absolute confidence.

With 20mm of excursion, the bespoke 6-inch bass driver is designed specifically to integrate with our latest ATL™ bass-loading and Laminair™ airflow technologies. The combination outperforms most 8-inch monitors, offering unparalleled bass extension, headroom, dynamics, and low distortion at all levels. The high end is courtesy of a one-inch precision-built fabric soft-dome tweeter, with a shallow waveguide that creates wide, tonally consistent dispersion and rock-solid imaging. Both the bass and treble drivers are precisely and individually controlled by a pair of 200W ultra-low-distortion, high-damping-factor Class-D amplifiers.

Whether in portrait or landscape placement, the PMC6’s sophisticated DSP engine automatically adjusts the crossover, ensuring optimum tonal accuracy, phase and imaging.

The monitor can be calibrated using the rear-panel controls or with PMC’s intuitive browser-accessible SoundAlign™ software.
The PMC6 can be upgraded by adding a PMC8 SUB to create a full-range, free-standing PMC6 XBD system. Activating the ‘XBD’ DSP mode ensures the perfect marriage of the two units, creating a clean LF extension down to 25Hz.
 

  • Active 2-way nearfield reference monitor with ATL™ bass loading
  • Frequency response: 39Hz - 25kHz (- 3dB @1m full space, on-axis)
  • Max. cont. SPL: 106dB @1m (half space value calculated as +3dB from full space measurement.
    Un-weighted input,20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
  • State-of-the-art Class-D amplifiers: HF 200W, LF 200W
  • Analogue/AES3 digital input (16/24-bit, 18 -192kHz sample rate)
  • Digital ‘through’ output (AES3 24-bit 96kHz)
  • SoundAlign™ network control interface for single or group EQ & settings
  • Sophisticated DSP crossover, driver protection, EQ, and delay/polarity options
  • Automatic portrait/landscape placement DSP correction
  • PMC6 + PMC8 SUB creates PMC6 XBD, with LF down to 25Hz
  • Ceiling-mount yoke allows suspension in multi-channel or immersive systems
     

Customer Reviews

"These are my first return to two-way monitors in 5 years and they are the best sounding monitors I have ever had in my professional studio room. The PMC 6’s are incredibly honest, neutral and accurate but without being lifeless. The depth and detail of the sound make me feel like I am standing in my Ableton & Protools projects. They are a real gentle but warm delivery that encourages your ears, as opposed to smack you in the face. Plenty of power though! I couldn’t believe how well they translated from the get-go, set completely flat with any EQ tweaks. I spent two hours moving them around to find the best placement then got the tape measure out to perfect them before finally mic’ing up with room correction and omni mic. I’m the happiest I’ve ever been with a set of monitors and these are my first PMC’s."
Mr C, Ash Vale
"The first few seconds of listening to an orchestral performance I recently recorded through the PMC 6s was stunning. I closed my eyes and the monitors disappeared. I was there with the performers. I couldn’t be happier."
Mr J, Ashland
"Always Love PMC"
Mr M, Madrid
"I am very impressed with the PMC6. I mixed my first song yesterday and I reached the finish line much faster and with a stronger mix vs. my other monitors. I am really excited to learn these better, but we’re off to a fast start together."
Mr S, Lake Orion
"So excited to have these finally !!"
Mr L, Dacula
"Amazing - exactly what I was looking for - thank you."
Mr R, SOUTHAMPTON

OPTIONS & UPGRADES

PMC 8 SUB
The PMC8 SUB is a true low-frequency reference monitor which extends the bass response of your speaker system.
ADD A SUB
PMC 6 XBD
Adding a PMC8 SUB unit to the PMC6 easily upgrades the system to a twin-cabinet XBD monitor system. Find out more!
EXTEND TO XBD

THE SOUNDALIGN INTERFACE

TAKE CONTROL

SOUNDALIGN digital interface
soundalign devices
The SoundAlign™ web interface is a simple and intuitive means of controlling and configuring our nearfield and midfield active monitors and subwoofers. Each monitor incorporates an internal web server accessible over a standard wired Ethernet connection using a web browser on any smartphone, tablet, PC, or Mac. It makes set-up easy, whether it’s stereo or the most complex immersive system.
ABOUT SOUNDALIGN
One of the keys to our legendary natural, uncoloured sound is our Advanced Transmission Line (ATL) bass-loading. ATL uses energy generated by the bass unit in a much more intelligent and efficient way than speaker designs based on ported or sealed boxes. Our Laminair airflow technology further enhances ATL and improves definition, timing and eradicates unwanted air noise.
ABOUT ATL & LAMINAIR
PMC 6 ATL Cutaway
PMC Dolby Atmos at PMC Studios London
Conventional monitors have narrow dispersion which restricts the width of the accurate listening area
standard dispersion
PMC monitors have wide dispersion to provide accurate sound across the widest possible listening area
PMC wide dispersion

WIDE DISPERSION

All PMC monitors have ultra-wide dispersion and a linear off-axis response. This creates a vast sweet spot for stereo and a seamless sound field for immersive formats, allowing sounds to be placed and adjusted with complete precision.

NEW TO OUR STUDIO FAMILY

New Studio Series Gallery
New Studio Series Gallery
New Studio Series Gallery
New Studio Series Gallery
New Studio Series Gallery
New Studio Series Gallery
New Studio Series Gallery
New Studio Series Gallery
New Studio Series Gallery